Fuji Xerox ApeosPort-IV 3070

Specifications
565
Appendix
16
Finisher-C1 (Optional)
Staple
z
Capacity
A4 : 50 sheets (60 - 90 gsm (56 - 90 gsm when
the HCF Kit (optional) is installed.))
z
Paper Size
Maximum : A3, 11 × 17"
Minimum : B5
z
Position
1 place (front/angled stapling, back/straight stapling), 2 places
(parallel stapling)
Important • When using 80 gsm paper
Punch
*1
z
Paper Size
A3, 11 × 17", B4, A4, A4 , 8.5 × 11", 8.5 × 11" , B5
z
Number of Holes
2/4 holes, or US 2/3 holes
z
Paper Weight
60 - 200 gsm (56 - 200 gsm when the HCF Kit (optional) is
installed.)
Important • When using 80 gsm paper
•
*1
For the Punching feature, US 2/3 Hole Punch Kit for
Finisher-B1 or 2/4 Hole Punch Kit for Finisher-B1 is
required.
Booklet Finishing
*1
z
Capacity
15 sheets (center binding), 5 sheets (center folding)
z
Paper Size
Maximum : A3, 11 × 17"
Minimum : A4, 8.5 × 11"
z
Paper Weight
60 - 80 gsm (center binding), 60 - 105 gsm (center folding)
Important • When using 80 gsm paper
•
*1
For the center binding/folding specified was output,
remove the output paper from the tray to output the next job.
In addition, when you print a job with center binding/folding
specified and smaller-sized paper remains on the output
tray, remove the paper from the tray first.
Dimensions/Weight Width 643 × Depth 552× Height 942 mm, 28 kg
Width 643 × Depth 597 × Height 1,058 mm, 37 kg (When the
Booklet Maker Unit is attached)
Important • The values do not include the finisher transport area located
within the main unit.
Space Requirement
(when connected to the
main unit)
Width 1,615 × Depth 1,104 mm (Main Unit + Finisher-B1/Main
Unit + Finisher-B1 + Booklet Maker)
Important • When the extension tray and the Tray 5 (Bypass) are fully
extended.
Type
z
Output Tray × 1
Sorting/Stacking
z
Finisher Tray × 1
Sorting (Offset available)/Stacking (Offset available)
Paper Size/
Paper Weight
z
Paper Size (Output Tray / Finisher Tray)
Maximum : A3, 11 × 17"
Minimum : B5
z
Paper Weight (Output Tray / Finisher Tray)
60 - 216 gsm (56 - 216 gsm when the HCF Kit (optional) is
installed.)