Output Format
131
Copy
3
Folding (Outputting Bi-Folded)
This feature allows you to fold copies in half, or crease copies in half.
Important • When Finisher-B1 or Finisher-C1 is installed, do not remove output copies from the finisher
tray until all of the output copies have been delivered.
Note • The supported paper orientation is only . Select the tray whose orientation is set to .
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Folding].
2 Select any option.
Off
Does not fold copies.
Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) or the
Finisher-C1 with Booklet Maker (optional) is installed.
z
When the Booklet Maker Unit for Finisher-B1 (optional) is installed:
Creases copies in half.
z
When the Finisher-C1 with Booklet Maker (optional) is installed:
Folds copies in half.
To Next Page
Loading...
