Job Flow Procedure
339
Job Flow Sheets
7
Step 3 Confirming/Changing the Job Flow Sheet
1
To confirm the details, select [Details].
To change the settings, select [Change
Settings].
For information on how to check or change job flow
settings, refer to "Selecting/Changing a Job Flow
Sheet" (P.340).
Step 4 Starting the Job Flow Sheet
1
Load a document.
Note • A job flow with an application linked does not require you to load a document.
2 Press the <Start> button.
Important • After executing the job flow, be sure to print the Job History Report to check the results. For
information on the Job History Report, refer to "5 Tools" > "Common Service Settings" >
"Reports" > "Job History Report" in the Administrator Guide.
To Next Page
Loading...
