Safety Notes
25
Before Using the Machine
1
Keep electrical and mechanical safety interlocks active. Keep the safety
interlocks away from magnetic materials. Magnetic materials may accidentally
activate the product and cause injuries or electric shock.
A ground fault interrupter is embedded in this product. If current leakage
occurs, the ground fault interrupter automatically cuts off power circuit to
prevent electric shock and a fire accident. The ground fault interrupter is
normally ON. Check once a month if the ground fault interrupter works properly
in accordance with the following procedures:
1) Press the power switch to the [ ] position
to switch the power off.
- When the Finisher-B1 (optional) is
installed
2) Make sure that the touch screen is blank
and the <Energy Saver> button is not lit.
3) Open the front cover.
4) Press the main power switch to the [ ]
position to switch the main power off.
To Next Page
Loading...
