Error Code
489
Problem Solving
14
021-700
O [Cause] The USB cable is unplugged or the USB interface may be
out of order.
[Remedy] Confirm that the USB cable is connected and switch off the
machine power, make sure that the touch screen is blank,
and then switch on the machine power. If the error still is
not resolved, contact our Customer Support Center.
021-701
O [Cause] The USB interface error occurred.
[Remedy] Retry after waiting for a while or confirm that the USB
cable is connected and switch off the machine power,
make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved,
contact our Customer Support Center.
024-340
024-341
024-342
024-343
024-345
024-346
024-347
024-348
024-349
024-350
024-351
024-352
024-353
024-354
024-355
024-356
024-357
024-358
024-359
024-360
024-361
024-362
024-363
024-364
024-365
024-366
024-367
024-368
024-370
024-371
024-372
024-373
024-375
O O O [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
Error Code
Category
Cause and Remedy
CPFSMO
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
To Next Page
Loading...
