14 Problem Solving
532
Problem Solving
14
Paper Jams in Tray 6
1 Pull out Tray 6 until it stops.
2 Remove the jammed paper.
Note • If the paper is torn, make sure no pieces
of paper remain inside Tray 6.
3 Push Tray 6 in gently until it stops.
Paper Jams in Duplex Module B
The following describes how to clear paper jams occurring in the duplex module B if the
machine supports the 2 Sided Printing feature.
1 Open Tray 5, and then while lifting up the
release lever gently open the duplex module
cover.
2 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray might hit
and injure your knees.
To Next Page
Loading...
