Fuji Xerox ApeosPort-IV C5575 Administration Guide

15 Problem Solving
598
Problem Solving
15
4 After you take out the staple cartridge, check
inside of the finisher for any remaining staples.
5 Pull up the metal part of the staple cartridge as
shown in the illustration.
6 Remove the jammed staples (1), and then
return the metal part pulled up in step 5 to the
original position (2).
7 Push the staple cartridge into the machine until
it clicks into place.
8 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine remains
paused.
CAUTION
Be careful in removing jammed staples.

Fuji Xerox ApeosPort-IV C5575 Specifications

General

Print Speed (Color)	50 ppm
Print Speed (Mono)	55 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Monthly Duty Cycle	300, 000 pages
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps