Fuji Xerox ApeosPort-IV C5575 Administration Guide

Replacing Consumables
75
Maintenance
3
13 Return the cover to the original position.
Note • Push the cover until it clicks into place.
14 Rotate the release lever clockwise to lock the
cover.
15 Close the front cover.
Note • If the front cover is not closed completely, a message appears and the machine will remain paused.
Replacing Staple Cartridge (for Finisher-A1)
When the optional Finisher-A1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When this message appears, load a new staple case
into the staple cartridge.
Important •The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance.
Use only staple cartridges recommended by Fuji Xerox.
Note • To order a staple cartridge, contact our Customer Support Center.
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Take the staple cartridge out of the finisher.

Fuji Xerox ApeosPort-IV C5575 Specifications

General

Print Speed (Color)	50 ppm
Print Speed (Mono)	55 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Monthly Duty Cycle	300, 000 pages
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps