Fuji Xerox ApeosPort-IV C5575 User Manual

3 Copy
100
Copy
3
2 Select [Target Area Color].
3 Select any color.
[Non-target Area Color] Screen
This screen allows you to select the color to be used in place of the colors other than the
selected source colors. You can select one color from seven preset and six custom options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1 Select [Dual Color].
2 Select [Non-target Area Color].
3 Select any color.
[Output Color - Color] Screen
This screen allows you to specify the color to be used for single-color copying regardless of
the colors in the original document.
You can select one color from six preset and six custom options for [Single Color].

Fuji Xerox ApeosPort-IV C5575 Specifications

General

Print Speed (Color)	50 ppm
Print Speed (Mono)	55 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Monthly Duty Cycle	300, 000 pages
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps