Fuji Xerox ApeosPort-IV C5575 User Manual

Printing Pending Jobs
419
Job Status
11
Printing Pending Jobs
After the last user operation on the control panel of the machine, a job is waiting to be
printed until the period of time specified in [Auto Print] elapses, instead of being printed
immediately. You can forcibly print this pending job without waiting for this time period to
elapse.
If a job is paused by the <Stop> button and is waiting to be resumed, you can also resume
the job. If there are multiple jobs, subsequent jobs are printed after the paused job has been
printed.
Note • If there are no pending jobs, the [Print Waiting Jobs] button is disabled.
For information on how to set [Auto Print], refer to "5 Tools" > "Common Service Settings" > "Machine Clock/Timers" > "Auto
Print" in the Administrator Guide.
1 Press the <Job Status> button.
2 Select [Print Waiting Jobs].
<Job Status> button

Fuji Xerox ApeosPort-IV C5575 Specifications

General

Print Speed (Color)	50 ppm
Print Speed (Mono)	55 ppm
Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Connectivity	USB, Ethernet
Monthly Duty Cycle	300, 000 pages
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps