Fuji Xerox ApeosPort-V 4020 Quick Reference

Image Quality Trouble
97
Troubleshooting
6
Part of the image
is missing on the
copy.
Is the paper damp? If the paper is damp, the copy image may be
partially missing or unclear. Replace the
paper with new one.
Refer to "Loading Paper" (P.65).
Is folded or wrinkled paper
included in the tray?
Remove the unsuitable paper or replace all of
the paper with new one.
Refer to "Loading Paper" (P.65).
Is the document pasted or
folded?
The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.
The copy has a
stripe pattern.
Is the enlargement ratio too
large?
Vertical stripes may be printed on the copies
depending on the ratio. Adjust the ratio to
eliminate the stripes.
Printing is faint.
(smudged,
unclear)
The paper is damp. Replace the paper with new one.
Refer to "Loading Paper" (P.65).
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new one.
Refer to "Replacing Drum Cartridges (for Customers
Having a Spot Maintenance Contract)" (P.79).
There is no toner left in the
toner cartridge.
Replace the toner cartridge with a new one.
Refer to "Replacing Toner Cartridges" (P.77).
Black dots are
printed.
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new one.
Refer to "Replacing Drum Cartridges (for Customers
Having a Spot Maintenance Contract)" (P.79).
Symptom Cause Remedy

Fuji Xerox ApeosPort-V 4020 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V 4020
Category	All in One Printer
Language	English