Replacing Consumables
69
Maintenance
3
1
Make sure that the machine is not operating,
and open the finisher front door.
2
With grasping the handle, pull the staple
cartridge holder to the right, towards you.
3
Pull the staple cartridge out of the finisher.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
4
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
To Next Page
Loading...
