Fuji Xerox ApeosPort-V 4070

Settings for the Secure Operation 1 (Initial Settings Procedures Using Control Panel)
11
5
5 Select [Change Settings].
6 Select [On].
7 Select [Save].
8 To exit the [Machine Clock/Timers] screen, select [Close].
Set Report Print
1
Select [System Settings] on the [Tools] screen.
2 Select [Common Service Settings].
3 Select [Reports].
4 Select [Print Reports Button].
5 Select [Disabled].
6 Select [Save].
7 To exit the [Reports] screen, select [Close].
Set Self Test
1
Select [System Settings] on the [Tools] screen.
2 Select [Common Service Settings].
3 Select [Maintenance].
4 Select [Power on Self Test].
5 Select [On].
6 Select [Save].
7 To exit the [Tools] screen, select [Close] twice.
8 Select [Reboot Now] on the confirmation screen.