Settings for the Secure Operation 1 (Initial Settings Procedures Using Control Panel)
8
5
Settings for the Secure Operation 1
(Initial Settings Procedures Using Control Panel)
This section describes the initial settings related to security features, and how to set them
on the machine's control panel.
Authentication for entering the System Administration mode
1
Press the <Log In/Out> button on the control panel.
2 Enter the system administrator’s ID with the numeric keypad or the keyboard displayed.
3 Select [Next].
4 Enter the system administrator’s passcode from keyboard when passcode is required.
5 Select [Enter].
6 Select [Tools].
Set Passcode Entry for Control Panel Login
1
Select [Authentication/Security Settings] on the [Tools] screen.
2
Select [Authentication].
3
Select [Passcode Policy].
4
Select [Passcode Entry for Control Panel Login].
5
Select [Change Settings].
6
Select [On].
7
Select [Save].
Set Overwrite Hard Disk
1
Select [Authentication/Security Settings] on the [Tools] screen.
2 Select [Overwrite Hard Disk].
3 Select [Number of Overwrites].
4 Select [1 Overwrite] or [3 Overwrites].
5 Select [Save].
Set Data Encryption
1
Select [System Settings] on the [Tools] screen.
2 Select [Common Service Settings].
To Next Page
Loading...
Need help?
General
