EasyManuals Logo

Fuji Xerox ApeosPort-V C3375 Administrator's Guide

Fuji Xerox ApeosPort-V C3375
771 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #216 background imageLoading...
Page #216 background image
5 Tools
216
Tools
5
Parallel
Port Status
Select [Enabled] to use a parallel interface.
Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from
the host device.
PJL
PJL (Printer Job Language) is a job control language and a PJL command is data prepended
to the top of the print jobs. Usually select [Enabled].
Auto Eject Time
Configure the time that the data so far received by the machine will automatically be
printed since data is no longer sent to the printer.
You can enter a time between 5 and 1275 seconds in 5 seconds increments.
Adobe Communication Protocol
Standard
Select this when the output protocol of the print driver is in the ASCII format.
Binary
Select this when the output protocol of the print driver is in the BCP format.
TBCP
Select this when the output protocol of the print driver is in the TBCP format.
Bi-directional Communication
Specifies whether or not to allow bi-directional communications.
USB
Port Status
Select [Enabled] to use a USB interface.
Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from
the host device.
PJL
PJL (Printer Job Language) is a job control language and a PJL command is data prepended
to the top of the print jobs. Usually select [Enabled].
Auto Eject Time
Configure the time that the data so far received by the machine will automatically be
printed since data is no longer sent to the printer.
You can enter a time between 5 and 1275 seconds in 5 seconds increments.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-V C3375

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-V C3375 and is the answer not in the manual?

Fuji Xerox ApeosPort-V C3375 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Duplex PrintingYes
Scan Resolution600 x 600 dpi
TypeMultifunction Printer
FunctionsPrint, Copy, Scan, Fax (optional)
ConnectivityUSB 2.0, Ethernet
Scanner TypeColor Scanner
Display7-inch color touchscreen
Paper SizeA3, A4, A5, B4, B5
Memory2 GB
Hard Disk Drive160 GB (optional)

Related product manuals