1 Before Using the Machine
32
Before Using the Machine
1
5 Select [Screen Default], and then select
[Change Settings].
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
6 Select a service you want to display.
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
7 Select [Save].
Setting the Screen After Auto Clear
You can select the screen to be displayed after Auto Clear from [Last Selection Screen] or
[Services Home] can be selected.
For information on Auto Clear, refer to "Auto Clear" (P.161).
1 Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
To Next Page
Loading...
Need help?
General
