Fuji Xerox ApeosPort-V C3375 Administrator's Guide

15 Problem Solving
622
Problem Solving
15
4 After you take out the staple cartridge, check
inside of the finisher for any remaining staples.
5 Pull up the metal part of the staple cartridge as
shown in the illustration.
6 Remove the jammed staples (1), and then
return the metal part pulled up in step 5 to the
original position (2).
7 Push the staple cartridge into the machine until
it clicks into place.
8 Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine remains
paused.
CAUTION
Be careful in removing jammed staples.

Fuji Xerox ApeosPort-V C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax (optional)
Connectivity	USB 2.0, Ethernet
Scanner Type	Color Scanner
Display	7-inch color touchscreen
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB (optional)