3 Copy
126
Copy
3
[Booklet Creation - Binding Shift] Screen
This screen allows you to specify the binding shift value in the range from 0 to 50 mm in 1
mm increments.
1 Use [+] and [-] or the numeric keypad to specify
a binding shift value.
[Booklet Creation - Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets to
reduce the thickness of each booklet. The machine folds copies in half, and piles them up to
form a booklet.
You can specify the number of sheets in the range from 1 to 50 in 1 sheet increments.
Note • When you specify the folding feature, specify the dividing number of sheets in the range from 1 to
15.
1 Select [On].
2 Specify the number of sheets in each subset, using [+] and [-] or the numeric keypad.
[Booklet Creation - Fold & Staple] Screen
You can specify [Fold Only] or [Fold & Staple].
1 Select any option.
îš„ Off
No finishing is carried out.
îš„ Fold Only
The copies are folded in half. The number of copies that can be folded is up to 5 (when 90
gsm paper is used). When the number is more than 5, the document is output by every 5
sheets.
To Next Page
Loading...
Need help?
General
