3 Copy
154
Copy
3
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
orientation shown in the above table.
Paper Size and Punching Position
Note • The distance between the two holes of the C3 Finisher 2/4 Hole Punch Unit is 80 mm for both 2 and
4 holes.
• The distance between the two holes of the C3 Finisher 2/3 Hole Punch Unit is 70 mm for 2 holes and
108 mm for 3 holes.
• The distance between the two holes of Finisher D4 or Finisher D4 with Booklet Maker is 80 mm and
is 70 mm with the 3 Hole Punch Unit for Finisher D4.
z
C3 Finisher (optional)/C3 Finisher with Booklet Maker (optional)
-2 holes
-3 holes
-4 holes
2 Holes
Left
2 Holes
Top
2 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A4, A3, B4, 8 x 10", 8.5 x 11", 8.5 x 13", 8.5 x 14",
11 x 15", 11 x 17", 8K
3 Holes 3 Holes
Top
3 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
4 Holes 4 Holes
Top
4 Holes
Right
A4 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, 11 x 15", 11 x 17", 8K
To Next Page
Loading...
Need help?
General
