EasyManuals Logo

Fuji Xerox DocuCentre-III 3007 Administrator's Guide

Fuji Xerox DocuCentre-III 3007
503 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #348 background imageLoading...
Page #348 background image
14 Problem Solving
346
Problem Solving
14
016-575
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the DNS server address
was not registered.
[Remedy] Specify the correct DNS server address. Or, specify the
destination FTP server using its IP address.
016-576
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because it could not connect to the
FTP server.
[Remedy] Ensure that both the destination FTP server and the
machine are available for network communications, by
checking the following:
z
The IP address of the server is set correctly.
z
The network cables are plugged in securely.
016-577
O [Cause] Unable to connect to the FTP service of the destination
server.
[Remedy] Take one of the following actions:
z
Check if the FTP service of the server is activated.
z
Check if the FTP port number of the server is correctly
registered on the machine.
016-578
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature due to unsuccessful login to the FTP
server.
[Remedy] Check if the login name (user name) and password are
correct.
016-579
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the scanned image could
not be saved in the FTP server after connection.
[Remedy] Check if the FTP server’s save location is correct.
016-580
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the file or folder name on the
FTP server could not be retrieved after connection.
[Remedy] Check the access privilege to the FTP server.
016-581
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the suffix of the file or folder
name exceeded the limit after connection.
[Remedy] Change the file name, or change the destination folder on
the FTP server. Or, move or delete files from the
destination folder.
016-582
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because file creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
z
Check if the specified file name can be used in the save
location.
z
Check if enough space is available in the save location.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-III 3007

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-III 3007 and is the answer not in the manual?

Fuji Xerox DocuCentre-III 3007 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-III 3007
CategoryAll in One Printer
LanguageEnglish

Related product manuals