5 Scan
276
Scan
5
îš„ 1 Sided
Select this option to scan only one side of the document.
îš„ 2 Sided (Head to Head)
Select this option when both sides of the 2-sided document are in the same orientation.
îš„ 2 Sided (Head to Toe)
Select this option when both sides of the 2-sided document are in opposite orientations.
îš„ More
Displays the [2 Sided Scanning] screen.
Refer to "[2 Sided Scanning] Screen" (P.276).
[2 Sided Scanning] Screen
This screen allows you to select the status and orientation of original documents.
1 Select any option.
îš„ 1 Sided
Select this option to scan only one side of the document.
îš„ 2 Sided
Select this option to scan both sides of the document.
îš„ Originals
This option is displayed when [2 Sided] is selected.
z
Head to Head
Select this option when both sides of the 2-sided document are in the same orientation.
z
Head to Toe
Select this option when both sides of the 2-sided document are in opposite orientations.
îš„ Original Orientation
Specify the orientation of the loaded document.
When you load the top edge of the document against the left side of the document glass or
the document feeder, and then select [Sideways Images], the document is displayed in the
correct orientation when viewed on your computer screen.
Load the document in the [Sideways Images] orientation when [File Format] is set to [TIFF/
JPEG Auto Select], [TIFF], or [JPEG]. The document is displayed in the [Upright Images]
orientation when viewed on your computer screen.
Note •If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
To Next Page
Loading...
Need help?
General
