Output Format
137
Copy
3
îš„ Format & Style
Displays the [Comment - Format & Style] screen.
You can select a font size from three options, or can directly specify the size in the range
from 6 to 64 points in 1 point increments. You can also select a font color from seven
options.
Note • When both [Date] and [Page Numbers] are set, or when [Force Annotation] is set, [Font Color] is set
to [Black].
[Date] Screen
This screen allows you to add a date onto copies. The date shows when you started copying
the document.
You can change the date format. For more information, refer to "5 Tools" > "Common Service Settings" > "Watermark" >
"Date Format" in the Administrator Guide.
1 Select any option.
îš„ Off
No date is added.
îš„ On
A date is added.
îš„ Apply To
Displays the [Apply Date To] screen.
You can select whether to add a date onto the first copy page only, or onto each copy page.
îš„ Position
Displays the [Date - Position] screen.
You can select a date position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
îš„ Font Size
Displays the [Date - Font Size] screen.
You can select a date size from three options, or can directly specify a size in the range from
6 to 24 points in 1 point increments.
[Page Numbers] Screen
This screen allows you to select a page-number style and its position.
To Next Page
Loading...
Need help?
General
