5 Scan
284
Scan
5
Message (Entering the E-mail Body)
You can enter the e-mail body using the following procedure.
1 Select [Message].
2 Enter a message with up to 512 characters using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.73).
Preview (Previewing the Scanned Images during a Scan Job)
You can preview the scanned images while scanning the document.
1 Select the [Preview] check box.
2 Preview the scanned images after the document is scanned.
Important • If [MRC High Compression] is set to [On], you cannot preview the scanned images when the [Specific
Color] check box is selected on the [File Format] screen or Microsoft
®
Office format is selected.
Color Scanning (Selecting an Output Color)
You can set the output color to scan a document.
Note • Only [Black & White] is selectable when [Searchable Text] is set to [Searchable] on the [File Format]
screen. To enable [Grayscale] and [Color], the High Compression Image Kit (optional) is required. For
more information, contact our Customer Support Center.
• [Color Scanning] is not displayed on the [E-mail] screen depending on the settings in the System
Administration mode. In that case, set [Color Scanning] from the [Advanced Setting] screen.
1 From the menu displayed by selecting [Color
Scanning], select any option.
îš„ Auto Detect
The color of the document is determined automatically; the machine scans in full color when
the document is colored, otherwise scans in monochrome.
Note • [Black & White] is not selectable when [MRC High Compression] is set to [On] on the [File Format]
screen or Microsoft
®
Office format is selected.
• When you select [Auto Detect], the available features on the [Advanced Settings] screen are the
same as when you select [Color] in [Color Scanning] for color documents, or the same as when you
select [Black & White] in [Color Scanning] for monochrome documents.
To Next Page
Loading...
Need help?
General
