To Next Page

To Previous Page

4 Fax

192

Fax

Simple Fax

You can select [Fax/Internet Fax] or [Simple Fax] on the [Services Home] screen to set the

features for the Fax service.

This section describes the features you can select on the [Simple Fax] screen. [Simple Fax]

allows you to use only basic features to easily send faxes. The following shows the reference

section for each feature.

Specifying a Destination Using the Numeric Keypad ......................................................................................................... 192

Speed Dialing (Specifying a Destination Using an Address Number) ............................................................................ 193

Specifying a Destination Using a One Touch Button.......................................................................................................... 194

Resolution (Specifying the Scanning Resolution) ................................................................................................................ 195

Original Type (Selecting the Document Type)...................................................................................................................... 195

2 Sided Scanning (Transmitting 2-sided Originals) ............................................................................................................ 196

1 Select [Simple Fax] on the [Services Home]

screen.

Note • [Simple Fax] is not displayed on the [Services

Home] screen when the Server Fax service is

enabled.

2 Select a feature on the [Simple Fax] screen.

Note • For the Simple Fax service, you can only set [Resolution], [Original Type], and [2 Sided Scanning]. In

addition, when you use this service, [Mixed Size Originals] is set to [On], and [Transmission Header

Text] is set to [Display Header]. If you want to set the other options, use [Fax/Internet Fax] on the

[Services Home] screen to send faxes.

• You cannot switch between [Fax/Internet Fax] and [Simple Fax]. To switch one to another, you must

return to the [Services Home] screen. Once you return to the [Services Home] screen, the settings you