3 Copy
164
Copy
3
[Copy] Screen When Combine Original Sets is in Progress
The [Copy] screen is displayed when copying starts.
îš„ Delete
Clears the document data stored with the Combine Original Sets feature, and cancels
copying.
Note • You can also press the <C (Clear)> or <Clear All> button on the control panel to perform the same
operation.
îš„ Last Original
Select this button to end scanning documents.
îš„ Next Original
Select this button when you have more documents to copy. This button is always selected
when the Combine Original Sets feature is used.
îš„ Start
After loading the next document, select this button to scan the next document.
Note • You can also press the <Start> button on the control panel to perform the same operation.
To Next Page
Loading...
Need help?
General
