Common Service Settings
127
Tools
5
2
Select a date format.
3
Specify [Year], [Month], and [Day].
4
Select [Save].
Time
Set the time in the system clock of the machine, using 12-hour or 24-hour format.
The time set here will be printed on all lists and reports.
1
Select [Time], and then select [Change Settings].
2
Select the time format.
3
When you select [12 Hour Clock], set [AM] or [PM].
4
Specify [Hours] and [Minutes].
5
Select [Save].
NTP Time Synchronization
You can synchronize the machine clock with a time server (NTP: Network Time Protocol),
receiving time information from the server.
To connect to a time server, select [On] for [NTP Time Synchronization], and set the IP
address of the time server in [Time Server Address].
Connection Interval
Select the time interval to connect to the time server.
You can select from 1 to 500 hours in 1 hour increments.
To Next Page
Loading...
