Notes and Restrictions
715
Appendix
16
- [Output Destination] can be specified, but the staple and hole punch cannot be
specified.
- The [Pages per Side] feature can be specified only when you print PDF files.
- HTTP or HTTPS can be used for the communications between the machine and a
remote server.
- Printable file formats are [TIFF], [PDF], and [XPS].
- Print data is spooled to the hard disk of the machine, and then printed as a job.
Therefore, the print data is recognized as a job while the data is being spooled to the
hard disk.
- This feature requires the optional hard disk for some models.
- The Secure Print feature cannot be used.
- Printing is available even when [Auto Print] is set to [On] under [Machine Clock /
Timers].
- "Web Applications - Print" is displayed on the [Job Status] screen.
- The <Online> indicator is unlit while the print data is being spooled to the hard disk.
z
XPS stands for XML Paper Specification.
îš„ Job Flow Settings for High Compression Format
z
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
- File Format (with thumbnail specification): [DocuWorks] or [XPS]
z
If settings other than the above are used, you can register a Job Flow sheet on the machine, but an error
occurs when the machine executes the Job Flow and the Job Flow cannot be carried out.
z
XPS stands for XML Paper Specification.
îš„ Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating a
job flow on the machine, any subsequent change of the number or address on the Address
Book is not reflected on the job flow created. To transmit to the changed address, you must
directly correct the address registered on the job flow.
Notes and Restrictions on the Security Features
îš„ Allow User to Disable Active Settings (for Forcible Printing Features)
This feature cannot apply to the ordinary print jobs. This feature is applicable to the jobs
stored in the machine and then printed by the instruction from the touch screen, such as
Copy, Secure Print, Private Charge Print, Print Stored File, and Media Print - Text jobs.
Notes and Restrictions on the Authentication and Accounting Features
îš„ Login to Remote Accounts (ApeosPort Series Models Only)
z
When the authentication server performs print or direct fax using Kerberos Server, trying
to authenticate with the user information authenticated by the machine will be failed.
To Next Page
Loading...
Need help?
General
