z
Select[ ]to display the previous screen or[ ]to display the next screen.
6
Select the position where you want to assign a service.
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
The layout of the buttons in this screen corresponds to the layout of those on the Services Home screen.
7
Select a service you want to display on the Services Home screen.
z
Select[ ]to display the previous screen or[ ]to display the next screen.
z
You cannot assign the same feature to more than one button.
8
Select [Save].
9
Select [Save].
Services Home - Additional Features
You can select additional feature buttons, which are displayed on the Services Home
screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.
To Next Page
Loading...
