Error Code
571
Problem Solving
15
033-547
[Cause] Communication was terminated by a cause such as pressing the
<Stop> button.
[Remedy] No measure is required.
033-548
[Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the
operation again.
033-549
[Cause] Cannot use the Fax service because of causes such as memory is
insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550
[Cause] Cannot execute another job because fax communication is in
progress.
[Remedy] Wait until the job being communicated completes, and then
execute the operation again.
033-551
[Cause] You attempted to change a job immediately before fax or
telephone communication completed.
[Remedy] Wait for a while, and execute the operation again.
033-552
[Cause] The total quantity of error lines detected with G3 exceeded the
set value.
[Remedy] Confirm the model of the other machine, and execute the
operation again. If receiving, ask the sender to send again.
033-553
[Cause] This machine does not have confidential or relay function. The
F-code sent from the other machine contains an instruction for
a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-
code.
033-554
[Cause] The password was omitted or did not match in fax
communication.
[Remedy] No measure is required.
033-555
[Cause] The password received from the other machine did not match
the password for receiving faxes on the machine.
[Remedy] Check whether the sender specified an incorrect machine
password.
033-556
[Cause] The password sent to the other machine did not match the
password for receiving faxes on the other machine.
[Remedy] If necessary, check whether the correct machine password has
been instructed to the other machine.
033-557
[Cause] The number of services or of recipients exceeds the maximum
limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases,
or reduce the number of recipients, and then send again.
033-558
[Cause] The machine is set to reject faxes without a remote ID, and a
remote ID was not sent from the other machine.
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine
to receive even when a remote ID is not sent.
Error Code
Cause and Remedy
To Next Page
Loading...
