Appendix
692
Appendix
16
îš„ Print Jobs while the Control Panel is being Operated
The processing and output speeds of print jobs may slow in the following conditions:
z
The control panel is being operated while the machine processes a print job.
z
The status of a print job is being viewed in the [Job Status] screen.
îš„ When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the
memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
îš„ Direct Print via USB Host (a USB memory device)
When the machine is in the Sleep mode, your computer does not detect the machine if you
connect a USB memory device to the machine. Exit the Sleep mode, and thenconnect the
USB memory device and send a print job.
îš„ Printing from a USB Memory Device
z
To print from a USB memory device, the USB Memory Kit (optional) is required.
z
Use USB 2.0 compliant memory devices only.
The following USB memory devices are not supported:
- A USB memory device with multiple media partitions that require other utilities to
access to the contents therein.
- A USB memory device connected via an external hub.
z
Multiple USB memory devices cannot be used simultaneously.
z
The machine does not display a menu to prevent you from removing a USB memory
device while it is being accessed.
îš„ Meter Counts for 2 Sided Printing
When printing 2 sided, depending on the application being used, blank sheets can be
inserted automatically to adjust pages. These blank sheets inserted by the application will
also be counted by the meter.
îš„ PDF Direct Print
PDF Direct Print supports Adobe PDF 1.6. However, note the followings:
z
It may take long to output a PDF file, for the rendering processing is complicated.
z
This feature does not support the "Embed OpenType Fonts" setting of Adobe
®
Acrobat
®
7 (PDF 1.6).
z
This feature supports the features of PDF 1.6 created by Adobe Acrobat 7 or later.
However, it does not support the features of PDF 1.7 (Adobe Acrobat 8 and 9).
z
PDF Bridge, which is provided by Fuji Xerox, of the machine supports the features of PDF
1.6 such as transparent object.
z
Set the PostScript Memory to its maximum value (128MB) to print PDF files properly.
To Next Page
Loading...
Need help?
General
