Fuji Xerox DocuCentre-V 3065

Appendix
726
Appendix
16
z
The call destination can be specified also with the keyboard displayed on the screen.
Note
z
To disconnect the call, select [Line Cut].
z
If your telephone line is set to touch-tone, [Tone (:)] does not appear.
z
If you want to send tones (or to use the touch-tone services) while using a pulse line, select [Tone (:)].
z
Some touch-tone services may not be available even if you set your telephone to send tones.
4 When the call is connected, lift the receiver and start speaking.
5 After the call is finished, place the receiver back in the cradle.
Important
z
Make sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".