Fuji Xerox DocuCentre-V 3065

Replacing Consumables
81
Maintenance
3
1 Pull up the knob on the document feeder top cover, and open the document feeder top
cover completely.
2 Pull up the lever to open the inner cover.
3 Stick the supplied pin into the old stamp cartridge, and pull it straight out of the machine.
Note
z
If only the sponge part of the stamp cartridge is removed, make sure of removing the bottom part of the
cartridge.
4 Insert the new stamp cartridge.
5 Close the inner cover of the document feeder.