5 Tools
172
Tools
5
Uncollated - Default Separator Tray
Set the default value for [Separators Tray] under [Copy Output] > [Uncollated with
Separators] in the [Copy] and [Output Format] screens.
Output Destination
Set the default value for [Output/Offset] under [Copy Output] in the [Copy] and [Output
Format] screens.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Output Destination (Simple Copy)
Set the output destination when you start copying from the [Simple Copy] screen.
Note • If paper cannot be output to the tray you set, the destination may be changed automatically.
• When the [Simple Copy] screen is displayed, you can confirm the output destination on the [Review]
screen, which can be displayed by pressing the <Review> button. For information on the <Review>
button, refer to "2 Product Overview" > "Control Panel" in the User Guide.
Face Up/Down Option
Set the default value for [Face Up/Down Output] in the [Output Format] screen.
Sample Job
Set the default value for [Sample Job] in the [Job Assembly] screen.
Annotations - Stored Comment
Set the default value for [Stored Comments] displayed when [Comment] is selected for
[Annotations] in the [Output Format] screen.
You can select a comment type from eight preset types and custom text registered.
For information about how to set custom text, refer to "Annotations - Create Comments" (P.176).
Annotations - Comment on Side 1 and Side 2
Set the default value for [Position] displayed when [Comment] is selected for [Annotations]
in the [Output Format] screen.
Annotations - Comment - Font Size
Set the default value for [Font Size] under [Format & Style] displayed when [Comment] is
selected for [Annotations] in the [Output Format] screen.
Date - Position on Side 1 and Side 2
Set the default value for [Position] displayed when [Date Stamp] is selected for
[Annotations] in the [Output Format] screen.
Date - Font Size
Set the default value for [Font Size] displayed when [Date Stamp] is selected for
[Annotations] in the [Output Format] screen.
Page Numbers - Style
Set the default value for [Style] displayed when [Page Numbers] is selected for
[Annotations] in the [Output Format] screen.
To Next Page
Loading...
Need help?
General
