Cleaning the Machine
81
Maintenance
3
Cleaning the Machine
This section describes how to clean the machine.
The following shows the reference section for each procedure.
Cleaning the Exterior..................................................................................................................................................................... 81
Cleaning the Touch Screen .......................................................................................................................................................... 82
Cleaning the Document Cover and Document Glass ............................................................................................................ 82
Cleaning the Narrow Glass Strip and Document Presser ..................................................................................................... 82
Cleaning the Document Feeder Rollers..................................................................................................................................... 83
Cleaning the Exterior
The following describes how to clean the exterior of the machine.
Important • Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the machine
as they might discolor, deform, or crack covers.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying.
1 Wipe the exterior with a firmly wrung soft cloth
moistened with water.
Important • Do not use cleaning agents other than water
or neutral detergent.
Note • If you cannot remove the dirt easily, gently
wipe the machine with a soft cloth moistened
with a small amount of neutral detergent.
2 Wipe off any excess water with a soft cloth.
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never use
aerosol cleaners to avoid catching fire and explosion.
When cleaning this product, always switch off the power and then the main power
inside the body front cover, and unplug the product. Access to a live machine
interior may cause electric shock.
To Next Page
Loading...
