Interface Cables
23
Before Using the Machine
1
îš„ When the Secondary Ethernet (optional) is
installed
Note • Secondary Ethernet can be used as
1000BASE-T.
Furthermore, note that Gigabit Ethernet
(optional) is required to use the conventional
*
Ethernet interface connector as 1000BASE-T.
* : When the option is not installed.
7 Return the rear left cover to its original position.
8 Press the main power switch to the [ | ] position to switch on the main power.
9 Close the front cover.
10 Press the push-button power switch to switch on the power.
For more information on setting items, refer to "Printer Environment Settings" (P.305).
To Next Page
Loading...
Need help?
General
