Customizing the Control Panel
33
Before Using the Machine
1
1 Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4 Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
5 Select [Custom Button 2], and then select
[Change Settings].
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
6 Select [Send from Folder].
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
7 Select [Save].
123
4
56
789
0#
C
To Next Page
Loading...
