Paper Jams
583
Problem Solving
15
2 Pull out the tri-fold output Tray [2d], swing the
Handle [2e], and remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
3 If you cannot remove the paper in step 2,
return the Handle [2e] to the original position.
Swing the Handle [2e], turn the Knob [2c] to
the right, then remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4 Swing back the opened Handle ([2f] or [2e]),
and push back the tri-fold output tray 2d.
Note • If the finisher front door is not completely
closed, a message will appear and the
machine will remain paused.
Paper Jams at the Tri-fold Tray [2d] and the Handle [2g] when D2-Folder Unit is Installed
1
Make sure that the machine is not in operating,
and open the finisher right door.
2 Pull out the tri-fold output Tray [2d], swing the
Handle [2g], and remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
To Next Page
Loading...
Need help?
General
