Replacing Consumables
67
Maintenance
3
2 Put your hand under the dent of the toner
cartridge, and pull out the cartridge slowly
toward you.
3 Pull out the toner cartridge by holding the
bottom of the cartridge while gently pulling it
out.
Important • Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• If you have a used toner cartridge which is no longer needed, contact our Customer Support Center
for its disposal.
4 Unpack the new toner cartridge and shake it
five or six times to distribute the toner evenly.
5 Insert the toner cartridge into the associated
cartridge slot, and then push until it stops.
6 Close the front cover.
Note • If the front cover is not closed completely, a message appears and the machine will remain paused.
Never throw a toner cartridge into an
open flame. Remaining toner in the
cartridge may catch fire and cause burn
injuries or explosion.
If you have a used toner cartridge no
longer needed, contact your local Fuji
Xerox representative for its disposal.
To Next Page
Loading...
