15 Problem Solving
528
Problem Solving
15
033-553
[Cause] This machine does not have confidential or relay function. The F-code sent from the
other machine contains an instruction for a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-code.
033-554
[Cause] The password was omitted or did not match in fax communication.
[Remedy] No measure is required.
033-555
[Cause] The password received from the other machine did not match the password for
receiving faxes on the machine.
[Remedy] Check whether the sender specified an incorrect machine password.
033-556
[Cause] The password sent to the other machine did not match the password for receiving faxes
on the other machine.
[Remedy] If necessary, check whether the correct machine password has been instructed to the
other machine.
033-557
[Cause] The number of services or of recipients exceeds the maximum limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-558
[Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
remote ID is not sent.
033-559
[Cause] The authentication ID is incorrect.
[Remedy] An error occurred during operation of the maintenance system by Fuji Xerox. When the
communication line is available, contact our Customer Support Center.
033-560
033-561
033-562
[Cause] An error occurred during remote maintenance work.
[Remedy] This is an error occurring during remote maintenance work by Fuji Xerox. No measure is
required.
033-563
[Cause] Paper that can print faxed documents is not loaded in a tray.
[Remedy] Take one of the following measures:
z
Specify the paper size.
z
Confirm whether the paper tray is set correctly.
033-564
[Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the fax service settings and the fax number, and then send
again if sending. If the error still is not resolved, contact our Customer Support Center.
033-565
[Cause] Cannot send because too many recipients are specified.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-566
[Cause] Cannot send because the recipient (fax number) is not specified.
[Remedy] Correctly specify the recipient's fax number.
033-567
[Cause] The recipient (fax number) is incorrect.
[Remedy] Correctly enter the recipient's fax number, and execute the operation again.
033-568
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again. If the error still
is not resolved, contact our Customer Support Center.
Error Code Cause and Remedy
To Next Page
Loading...
