15 Problem Solving
582
Problem Solving
15
Paper Jams at the Handle [2b] and the Knob [2c] when D2-Folder Unit is Installed
1
Make sure that the machine is not in operating,
and open the finisher right door.
2 Move the Handle [2b] and turn the knob 3a to
the right. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
3 Return the Handle [2b] to the original position.
4 Close the finisher right door.
Note • If the finisher front door is not completely closed, a message will appear and the machine will
remain paused.
Paper Jams at the Knob [2c], the Handle [2e]/[2f] and the Tri-fold Output Tray 2d
when D2-Folder Unit is Installed
1
Make sure that the machine is not in operating,
and open the finisher right door.
To Next Page
Loading...
