Replacing Consumables
101
Maintenance
3
Replacing Stamp (for Duplex Automatic Document Feeder B1-PC)
If the machine offers the Fax service and the Stamp Kit SP (optional) is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by the
maintenance service contract.
• Before using consumables, carefully read instructions and precautions on their packages.
Note • We recommend always keeping spare consumables/periodic replacement parts in stock.
• To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
1 Lift the document feeder gently, and open the
Side 2 scanner.
2 Stick the supplied pin into the old stamp
cartridge, and pull it straight out of the
machine.
Note • If only the sponge part of the stamp
cartridge is removed, make sure of removing
the bottom part of the cartridge.
3 Insert the new stamp cartridge.
4 Close the Side 2 scanner, and then close the
document feeder gently.
To Next Page
Loading...