Copy Service Settings
207
Tools
5
Select the ratio from [100%], [Auto %], and the buttons registered as Reduce/Enlarge
Preset buttons.
When the default value of [Paper Supply] is set to [Auto Select], [Auto %] cannot be selected
for [Reduce/Enlarge].
For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.214).
Output Color
Set the default value for [Output Color] in the [Copy] screen.
When [No Default] is selected, select the output color in the [Copy] screen before making
copies.
Output Color (Simple Copy)
Set the default value for [Output Color] in the [Simple Copy] screen. You can select from
[Auto], [Color], and [Black & White].
Single Color
Set the default value for [Single Color] in [More...] of [Output Color] in the [Copy] screen. You
can select a color from six preset colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.214).
Dual Color - Source Color
Set the default value for [Source Color] that appears when [Dual Color] is selected for
[More...] of [Output Color] in the [Copy] screen.
Selecting [Color] enables you to select a color from six colors.
Dual Color - Target Area Color
Set the default value for [Target Area Color] that appears when [Dual Color] is selected for
[More...] of [Output Color] in the [Copy] screen. You can select a color from seven preset
colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.214).
Dual Color - Non-target Area Color
Set the default value for [Non-target Area Color] that appears when [Dual Color] is selected
for [More...] of [Output Color] in the [Copy] screen. You can select a color from seven preset
colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.214).
Original Type
Set the default value for [Original Type] on the [Image Quality] screen.
Original Type - Auto (Non-Black & White)
Set the default value for [Original Type] on the [Image Quality] screen.
This is valid when a color other than [Black & White] is selected for [Output Color] in the
[Copy] screen.
Original Type - Auto (Black & White)
Set the default value for [Original Type] in the [Image Quality] screen.
This is valid when [Black & White] is selected for [Output Color] in the [Copy] screen.
To Next Page
Loading...