Fuji Xerox DocuCentre-V C4475

Specifications
647
Appendix
16
* : Finisher-A1 cannot be installed to ApeosPort-V C7775/C6675/C5575/C4475 or DocuCentre-V C7775/C6675/C5575/C4475.
 Finisher-B1 (optional)
*1
Stacker Capacity Unstapled sheets
A4 : 500 sheets
B4 : 250 sheets
A3 or larger : 200 sheets
Mixed size
*
:250 sheets
Stapled sheets
30 sets
* : With paper of a larger size delivered on paper of a smaller size.
Important • When using P paper
Staple Capability : A4 : 50 sheets (90 gsm or less)
B4 or larger : 30 sheets (90 gsm or less)
Paper size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 position (front: angled)
Important • When using P paper
Dimensions Width 559 x Depth 448 x Height 246 mm
Weight 12 kg
Space Requirement (with
the main unit)
Width 1,129 x Depth 699 mm (main unit + Finisher-A1, when the
extension tray and the bypass tray are fully extended)
Type Finisher tray x 1 : Sorting (Offset available),
Stacking (Offset available)
Paper Size Maximum : A3, 11 x 17"
Minimum : B5
Paper Weight
52 - 220 gsm
*
* : 52 - 55 gsm output paper may not be aligned properly depending on the paper type.
Stacker Capacity Unstapled sheets
A4 : 2,000 sheets
B4 or larger : 1,000 sheets
Mixed size
*2
:300 sheets
Stapled sheets
A4 : 100 sets or 1,000 sheets
B4 or larger : 75 sets or 750 sheets
Creased + Stapled
*3
: 50 sets or 600 sheets
Creased
*3
:500 sheets
Important • When using P paper
Staple Capability : 50 sheets (90 gsm or less)
Paper size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 position (front: angled, back: straight)
2 positions (parallel)
Important • When using P paper
Punch
*4
Number of holes : 2/4 holes, US 2/3 holes
Paper size : A3, 11 x 17", B4, Legal (8.5 x 14"), A4, A4 ,
Letter (8.5 x 11"), Letter (8.5 x 11") , B5
Paper weight : 52 - 200 gsm
Important • When using P paper