Broadcast
293
Fax
4
F Code Method
When using the machine as the initiating station for performing Remote Relay Broadcast,
confirm the F Code and the password (if necessary) for the primary relay station.
z
When using the F Code method for Remote Relay Broadcast, the primary relay stations and secondary relay
stations must support our F Code method and the Relay Broadcast feature.
z
When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used as both an
initiating station and a relay station, we recommend that you use the fax signal method.
1 Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F Code with the numeric keypad.
z
You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
z
Print Directive
Printing/not printing at the primary relay station
Relay
Broadcast
Print
Directive
Primary
Relay
Station ID
Address
Number
Address
Number
....
Up to 20 digits
To Next Page
Loading...
Need help?
General
