Copying Problems
203
Problem Solving
12
The copy is not
the desired size.
The document has shifted out
of position.
Place the document correctly.
Refer to "Placing Document" (P.96).
The document feeder's
document guides are
misaligned.
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Refer to "Placing Document" (P.96).
The document is creased. Smooth out the document and place it again
correctly.
Refer to "Placing Document" (P.96).
The edges of
copies are cut off.
The document exceeds the
printable area.
Adjust the reduction/enlargement factor to
reduce the copy slightly.
Symptom Possible Cause Remedy
To Next Page
Loading...
Need help?
General
