EasyManuals Logo

Fuji Xerox DocuCentreS2320 User Manual

Fuji Xerox DocuCentreS2320
257 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
12 Problem Solving
218
Problem Solving
12
005-122
005-123
005-125
005-131
005-132
005-134
005-135
005-136
005-139
005-145
005-147
005-196
005-197
005-198
005-199
[Cause] A document jam occurred in the document feeder.
[Remedy] Remove the jammed document.
Refer to "Document Jams" (P.234).
005-210
005-275
005-280
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
005-305 [Cause] The document feeder's left cover is open.
[Remedy] Close the document feeder's left cover.
005-500 [Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
005-907
005-908
005-913
[Cause] A document jam occurred in the document feeder.
[Remedy] Remove the jammed document.
Refer to "Document Jams" (P.234).
005-940 [Cause] An error occurred in the document feeder.
[Remedy] Press the control panel's <Stop> button, and set the document on
the document feeder again.
005-948 [Cause] A document size mismatch error occurred in the document feeder.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
007-270 [Cause] Tray 1 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 1.
007-271 [Cause] Tray 2 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 2.
007-272 [Cause] Tray 3 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 3.
Error Code Cause and Remedy

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentreS2320 and is the answer not in the manual?

Fuji Xerox DocuCentreS2320 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentreS2320
CategoryPrinter
LanguageEnglish

Related product manuals