3.6 Printing After Checking the Print Result - Sample Print - 59
3. The [Paper/Output] tab appears.
Under [Copies], set the print quantity.
Note
• The first sample set is not included in the print quantity set under [Copies].
4. From [Job Type], select [Sample Print] and click [Settings].
The [Sample Print] dialog box appears.
5. Enter your user ID into [User ID].
The user ID can be up to 8 bytes of alphanumeric characters.
6. From [Retrieve Document Name], select [Enter Document Name] or [Auto Retrieve].
When [Enter Document Name] is selected, enter the desired document name in
[Document Name] within 12 bytes.
When [Auto Retrieve] is selected, the document name will be the name of the
document to be printed. If the printer cannot identify the name of the document, the
date and time that the document will be printed will be its name.
7. Click [OK] to close the [Sample Print] dialog box.
8. Click [OK] to close the [Printing Preferences] dialog box.
9. Click [Print] in the [Print] dialog box to start printing.
4
3
6
5
To Next Page
Loading...
