60 3 Print
Operations on the Control Panel
The following explains how to print or delete a Sample Print job depending on its print result.
1. Press the < > button on the control panel.
2. Press the < > button until [Sample Print] is
displayed.
3. Press the < > or <Eject/Set> button to
accept the selection.
A user ID is displayed.
4. Press the < > button until the desired user
ID is displayed.
Note
• The user ID is the ID set under [User ID] in the
[Sample Print] dialog box on your print driver.
5. Press the < > or <Eject/Set> button to
accept the selection.
The document name stored in the printer is
displayed.
6. Press the < > button until the desired
document name is displayed.
Note
• The document name is the name (of up to 12 bytes)
set under [Document Name] in the [Sample Print]
dialog box on your print driver.
• When more than one document is stored in the printer,
you can also select [All Documents].
7. Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to set whether to
delete or save the document after printing it
is displayed.
Note
• If you want to delete the document without printing,
press the < > button, display [Delete], press the
< >, and then press the <Eject/Set> button.
• If you want to save the document in the RAM disk after
printing, press the < > button, display [Print and
Save], and proceed to Step 8.
8. If printing the document, select the desired
option by pressing the < > button.
9. Enter the print quantity using the < >
button.
Print Menu
Secure Print
Print Menu
Sample Print
Select User ID
User1
Select Document
Report
Report
Print and Delete
Enter Quantity
1 Set(s)*
To Next Page
Loading...
Need help?
General
