1. LCD (Liquid Crystal Display)
Displays messages to help you set up and use your machine.
DocuPrint P275 dw/DocuPrint P285 dw:
A four-level indicator shows the wireless signal strength if you are using a wireless connection.
2. Power On/Off Button
• Turn on the machine by pressing .
• Turn off the machine by pressing and holding . The LCD displays [Shutting Down] for a few
seconds before going off.
3. Network Buttons
• DocuPrint P235 d:
Network
Press Network to set up wired network settings.
• DocuPrint P275 dw/DocuPrint P285 dw:
WiFi
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Fuji Xerox machine is connected to a wireless access point. When the
WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a
wireless access point.
4. Menu Buttons
OK
Press to store your machine settings. After you change a setting, the machine returns to the previous
menu level.
Back
• Press to go back one level in the menu.
• Press to select the previous digit when setting numbers.
7