1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Print Reports]
Level 1 Level 2 Description
Print Settings
- Print the Printer Settings page.
Network Config
(For network models)
- Print the Network Configuration Report.
Print File List
(Available only for certain models)
- Print a list of data saved in the memory.
Drum Dot Print
- Print the Drum Dot Check Sheet.
WLAN Report
(For wireless models)
- Print the wireless LAN connectivity diagnosis result.
[Machine Info.]
Level 1
Level 2 Description
Serial No.
- Display the machine's serial number.
Firmware Version
- Check your machine's firmware version.
Page Counter
- Display the total printed pages.
Parts Life
1
Toner Life
Display the remaining life of the toner cartridge.
Drum Life
Display the remaining life of the drum unit.
1
Life is approximate and may vary by type of use.
[Initial Setup]
Level 1
Level 2 Description
Reset Machine Reset
Restore all the machine settings that you have changed.
Network Reset
Restore all network settings back to the factory settings.
Factory Reset
Restores all the machine's settings to the factory defaults. Perform this
operation when you dispose of your machine.
Local Language
- Select the LCD language for your country.
Related Information
• Menu Table (for LCD Models)
240
To Next Page
Loading...
Need help?
General
